True Roof Curved Sheet

CURVED SHEET

Curved Sheets are available from True Roof profiles, Curving through computerised PLC crimping machine.
The minimum length of curve is 300 mm, start lead is 50mm & end lead is 350mm. The minimum length of curve is
400mm, thereby making length of curved sheet possible as 800mm. Length restrictions apply to curved sheets.
Curved sheet in high tensile metal is supplied at customers risk.

 PRE PAINTED GALVANISED IRON (PPGI)

Coating on : Hot Dip Galvanised Iron
Thickness : Standard 0.50mm
(Optional 0.40mm to 0.80mm)
Zn Coating (GSM) : Zn 90, Zn 120, Zn 275
Paint Systems : Regular Modified Polyster Paint (RMP)
Optional (SMP & PVdF)
Mpa : 245 Mpa (optional 350 Mpa)
Primer Service Coat : 5 microns Epoxy
Top Coat (Expossed Surface) : 15 to 20 Microns
Bottom Coat : 5 to 7 Microns

GALVALUME MILL FINISH (BARE GALVALUME)

Material Confirm to : AS 1397
Coating on : Cold Rolled Steel
Thickness : Standard Thickness of 0.47mm TCT
AL-Zn Coating (GSM) : AZ 150
Mpa : 245 / 350 / 550 Mpa

PRE PAINTED GALVALUME STEEL SHEETS (PPGL)

Material Confirm to : AS 1397
Coating on : Galvalume
Thickness : Standard 0.50mm
(Optional 0.40mm to 0.80mm)
Zn Coating (GSM) : AZ 150
Paint Systems : Regular Modified Polyster Paint (RMP)
Optional (SMP & PVdF)
Mpa : 245 / 350 / 550 Mpa
Primer Service Coat : 5 microns Epoxy
Top Coat (Expossed Surface) : 18 to 25 microns
Bottom Coat : 5 to 7 microns
AVAILABLE LENGTH
Supplied in maximum length up to 13 mtrs